Course Requirements for Examples:
Technical Emphasis Areas
A. Technical Emphasis – Mechanical
Required Discipline Specific courses (9 credits):
MEEM2700 Dynamics 3
MEEM3501 Product Realization I 3
MEEM3700 Mechanical Vibrations 3
Elective Engineering courses (8 credits):
Choose 3 Courses from the following list:
MEEM3230 Heat Transfer 3
MEEM3502 Product Realization II 3
MEEM4700 Dynamic Systems and Controls 4
ENG3500 Engineering for the Environment 3
Senior level (4000) approved technical elective 3
Total 17
Design Implementation Requirement is MEEM2500 - Integrated Design and Manufacturing (this course satisfies the laboratory requirement for this Technical Emphasis). Suggested Math and Science electives to meet prerequisite for some courses: MA3150, PH1200 & PH2200.
B. Technical Emphasis – Civil
Required Discipline Specific courses (13 credits):
CE3501 Environmental Engineering Fundamentals
OR ENG3500 Engineering for the Environment 3
CE3600 Fluid Mechanics 4
CE3610 Hydrology 2
CE3810 Soil Mechanics for Engineers 4 (lab)
Elective Engineering courses (9 credits):
Choose one of the following set of courses:
SU1300 Surveying 2
& CE3401 Transportation Engineering 3
OR CE2201 Structural Engineering I 3
Senior level (4000) approved technical electives 4-6
Total 22
Design Implementation Requirement is CE3332 - Fundamentals of Construction Engineering. Suggested Math and Science electives to meet prerequisite for some courses: MA3150, PH1200 & PH2200.
C. Technical Emphasis – Environmental
Required Discipline Specific courses (13 credits):
CE3501 Environmental Engineering Fundamentals
OR ENG3500 Engineering for the Environment 3
CE3600 Fluid Mechanics 4
CE3610 Hydrology 2
CE3810 Soil Mechanics for Engineers 4 (lab)
Elective Engineering courses (9 credits):
Senior level (4000) approved technical electives 9
Total 22
Design Implementation Requirement is CE3332- Fundamentals of Construction Engineering. Suggested Math and Science electives to meet prerequisite for some courses: MA3150, CH1140 & CH3500.
D. Technical Emphasis – Materials
Required Discipline Specific courses (12 credits):
MY3100 Materials Processing I 4
MY3110 Materials Processing II 4
MY3200 Materials Characterization I 4 (lab)
Elective Engineering courses (9-10 credits):
Choose 2 Courses from the following list:
MY3300 Design of Microstructure 3
MY3400 Mechanical Properties of Materials 3
ENG3500 Engineering for the Environment 3
Senior level (4000) approved technical electives 4-5
Total 21-22
Design Implementation Requirement is MEEM2500 - Integrated Design and Manufacturing or 3 ENG Design Implementation modules. There are no suggested Math and Science electives. Math and Science electives should be selected to support pursuit of Minor or Certification program.
E. Technical Emphasis – Chemical
Required Discipline Specific courses (13 credits):
CM2110 Fundamentals of Chemical Engineering I 3
CM2120 Fundamentals of Chemical Engineering II 3
CM3110 Transport/Unit Operations I 3
CM3120 Transport/Unit Operations II 3
CM3115 Measurement Analysis of Data 1 (lab)
Elective Engineering courses (8-9 credits):
Choose 2 Courses from the following list:
CM3220 Chemical Engineering Thermodynamics 3
CM3310 Process Control 3
CM3510 Chemical Reaction Engineering 3
ENG3500 Engineering for the Environment 3
Senior level (4000) approved technical electives 4-5
Total 21-22
Design Implementation requirement can be satisfied using any of the three options. Suggested Math and Science electives to meet prerequisite for some courses: CH1120 and either CH2400 & CH3510 or PH1200 & PH2200 dependent upon choice of engineering electives
F. Technical Emphasis – Biomedical
Required Discipline Specific courses (12 credits):
BE3500 Biomedical Materials 3
BE3600 Biomedical Instrumentation 3 (lab)
BE3750 Human Biomechanics 3
MEEM3230 Heat Transfer 3
Elective Engineering courses (9-10 credits):
Senior level (4000) approved technical electives 9-10
Total 21-22
Design Implementation Requirement is MEEM2500 - Integrated Design and Manufacturing or 3 ENG Design Implementation modules. Suggested Math and Science electives to meet prerequisite for some courses: BL2010, BL2011, BL2020 and BL2021
G. Technical Emphasis – Electrical
Required Discipline Specific courses (11 credits):
EE2150 Introduction to Signal Processing 3
EE2160 Linear Systems Analysis 3
EE2170 Digital Systems 3
EE2301 Electrical Engineering Lab I 1 (lab)
EE2302 Electrical Engineering Lab II 1 (lab)
Elective Engineering courses (10-11 credits):
Choose 2 Courses from the following list:
EE3120 Electrical Energy Systems 3
EE3130 Electronics 3
EE3140* Electromagnetics 3
EE3150* Communication Science 3
EE3170 Microprocessors 3
ENG3500 Engineering for the Environment 3
Senior level (4000) approved technical electives 5-6
Total 21-22
Design Implementation Requirement is MEEM2500 - Integrated Design and Manufacturing or 3 ENG design implementation modules. Suggested Math and Science electives to meet prerequisite for some courses: CS1121 or CS1131, PH1200 & PH2200. NOTE: Students choosing this emphasis area should take EE2110 instead of EE3010.
* Electing EE3140 or EE3150 would require an additional math course of MA3150.
H. Technical Emphasis – Computer
Required Discipline Specific courses (11 credits):
EE2150 Introduction to Signal Processing 3
EE2160 Linear Systems Analysis 3
EE2170 Digital Systems 3
EE2301 Electrical Engineering Lab I 1 (lab)
EE2302 Electrical Engineering Lab II 1 (lab)
Elective Engineering courses (10-11 credits):
Choose 3 Courses from the following list:
EE3173 Hardware/Software System Integration 3
EE3175 Model & Simulation of Computer Systems 3
CS1122 Introduction to Computer Science II 3
OR CS1132 Computer Science II 4
CS2321 Foundations I 3
CS3421 Computer Architecture 4
ENG3500 Engineering for the Environment 3
Senior level (4000) approved technical electives 2-3
Total 21-22
Design Implementation Requirement is MEEM2500 - Integrated Design and Manufacturing or 3 ENG design implementation modules. Suggested Math and Science electives to meet prerequisite for some courses: CS1121 or CS1131, PH1200 & PH2200. NOTE: Students choosing this emphasis area should take EE2110 instead of EE3010.
I. Technical Emphasis – Mining
Required Discipline Specific courses (12 credits):
MG2010 Safety in Engineering Practice 2 (lab)
MG2200 Intro to Minerals and Materials Processing 3
MG3300 Materials Handling and Transport 4
MG3400 Drilling and Blasting 3
Elective Engineering courses (9-10 credits):
Senior level (4000) approved technical electives
In Mining Engineering 9-10
Total 21-22
Design Implementation Requirement is MEEM2500 - Integrated Design and Manufacturing or 3 ENG Design Implementation modules. Suggested Math and Science electives to meet prerequisite for some courses: CH1120 and PH1200 and PH2200.
J. Technical Emphasis – Minerals Processing
Required Discipline Specific courses (12 credits):
MG2010 Safety in Engineering Practice 2 (lab)
MG2200 Intro to Minerals and Materials Processing 3
MG3300 Materials Handling and Transport 4
MG3400 Drilling and Blasting 3
Elective Engineering courses (9-10 credits):
Senior level (4000) approved technical electives
In Minerals Processing Engineering 9-10
Total 21-22
Design Implementation Requirement is MEEM2500 - Integrated Design and Manufacturing or 3 ENG Design Implementation modules. Suggested Math and Science electives to meet prerequisite for some courses: CH1120 and PH1200 and PH2200.
K. Additional Technical Emphasis areas
Course requirements for Technical Emphasis in Geological are under development and will be made available at the time of the ABET visit in the Fall of 2001. Other Technical Emphasis areas can be proposed at any time by faculty within the college of engineering. Proposed Technical Emphases will be submitted to the BSE Governance Committee from consideration and recommendation to the College of Engineering
